Product Details:
| Minimum Order Quantity | 1 Piece |
| Dimensions | 135 x 70 x 25 mm (LxWxH) |
| Foot Wear | 0.75 to 100 megaohm |
| Range Selection | By Slide Switch |
| Indications | Pass - Green LED |
| Low & High Fail | Red LED (With Alarm) |
| Test Actuation | By Pressing Metal Sensor Plate |
| Accuracy | +/-10% |
| Power Supply | 9 V Battery |
| Battery Status | By Dual Color LED |
| Weight | Approx 150 g with Battery |
| Calibration | Recommended every 12 months |
| Optional | Instruction Board, Foot Plate, Carry Case |
| Consist of | Wrist strap tester, Yellow Wall Station, Foot Plate |
We are a leading manufacturer of the Wrist Strap and Footwear Tester in India.
Features:
Wrist Strap & ESD footwears are the first lines of defense against electrostatic charges build upon the human body. It is designed to carry away this charge as soon as it is generated. At the same time, wrist strap/footwear must remain electrically safe for the user. Thus, it is important to test every wrist strap /footwear regularly.
Application:
The wrist strap and the footwear tester checks these parameters under actual operating conditions with the strap on the wrist or footwear on the foot. It clearly indicates whether or not the resistance the wrist strap/footwear system including the wearer is at least 0.75 Meg Ohms and not more than 10/100 Meg ohms respectively.
Product Details:
| Minimum Order Quantity | 1 Piece |
| Model | WST-01 |
| Brand | PB Statclean |
| Grade | Automatic |
| Size | 135 x 70 x 25 mm |
| Warranty | 12 Months |
| Weight | Approx 135 g with battery |
| Accuracy | +/-10% |
| Green Pass | Resistance Between 0.75 to 10 Meg Ohms |
| Audible Alarm | Sounds for open or Fail Condition |
| Battery Status | By Dual Color LED |
| Test actuation | By Pressing Metal Sensor Plate |
| Power supply | 9 V Battery |
| Calibration | Recommended every 12 months |
| Optional | Instruction Board,Carry Case |
| Red Fail | Resistance below 0.75 OR above 10 Meg Ohms |
We are a leading manufacturer, Supplier of Wrist Strap Tester in India.
Application:
The wrist strap is the first line of defense against electrostatic charges builds upon the human body. At the same time, wrist strap must remain electrically safe for the user. Thus, it is important to test every wrist strap regularly. The wrist strap tester checks these parameters under actual operating conditions with the strap on the wrist. It clearly indicates whether or not the resistance of the wrist strap system including the wearer is at least 0.75 Meg Ohms and not more than 10 Meg Ohms respectively.
Product Details:
| Minimum Order Quantity | 1 Piece onwards |
| Brand | PB Statclean |
| Model | WSM-03 |
| Application | Industrial, Laboratory |
| Color | Yellow |
| Wrist Strap Range | 0 to 10 Meg ohms |
| IndicationsPass Green LED Fail | Flashing Red LED |
| Audible alarm | For Fail Mode |
| Input power 12V @ 500 ma DC5. Accuracy | +/-10% |
| Repeatability | +/-10% |
| Dimensions | 125 x 65 x 35 mm (LxWxH) |
| Weight | 120 g |
| Optional | Grounding Cord 12 V Adopter |
| Warranty | 1 Year |
We are a leading manufacturer, supplier, and wholesaler of Continuous Wrist Strap Monitor.
Application:
This model wsm-03 continuously monitors the wrist strap to detect loss of continuity between operator and monitor. Conditions such as broken coil cords and improper contact with the skin are detected instantly to alert the operator before serious and expensive ESD damage can occur. As there is no resistive return path from the wrist strap, it uses the “capacitive ac pulse principle” to check if the operator is adequately grounded. The system is automatically activated when the wrist strap is plugged in. Continuous monitoring reduces the need for periodic checks and audits and also ensures greater security.
Product Details:
| Brand | PB Statclean |
| Accuracy | +/-10% |
| Wrist Strap PASS Range | 0.75 to 10 megaohm |
| Height | 1000 mm |
| Calibration | Every 12 months |
| Warranty | 12 Months only for Instrument |
| Power Source | 9 V Battery |
| Foot Wears PASS Range | 0.75 to 100 megaohm |
| Indications | Pass - Green LED |
| Battery Status | By Dual Color LED |
We are a leading manufacturer of Wrist Strap Cum Dual Foot Wear Combo Tester to our clients based in Delhi, India.
Application:
The Wrist strap Cum Dual Footwear tester is a jig type arrangement to test the validity of ESD wrist strap & footwear. The instrument measures Independent test simultaneously for a right foot, left foot and wrist strap at the same time. Other Footwear testers can only measure two foot at a time, or the combined resistance of both foot. The wrist strap cum dual foot tester reduces the testing time by half, and offers the operator a visual and audible measurement of pass or fail of both foot and wrist strap before entering the EPA.